A fat quarter is a piece of fabric that is 18" x 22". It is a quarter yard, but it is cut differently than you'll get if you ask for a quarter yard at the fabric counter at Joann's. This tutorial for a pillowcase dress takes advantage of the way that a fat quarter is already cut, so you'll have less cutting to do, less waste, and a ton of cute prints to choose from.
Since the top of a pillowcase dress is adjustable, this dress will fit little girls from size 2T through 6. The finished dress is 21" long and 17 ½" wide. A size 8 child on the slender side could easily wear this as a top. If you are unsure about sizing, just measure your little girl or one of her dresses.
Let's get to it!
You will need these notions and tools to work with:
2 fat quarters of fabric in your main color
1 fat quarter in a coordinating color
Coordinating thread
Scissors and/or rotary cutter
Ruler and cutting mat
Marking tool (if desired)
The Steps
1. First cut 4" off your coordinating color of fabric to make a 18" square. You will use my "How To Make 4 Yards of Bias Tape From a Fat Quarter"
method to make bias tape out of this 18" square.
method to make bias tape out of this 18" square.
2. Cut the 4" x 18" strip of fabric that you just made into 2 strips that are 2" x 18" each.
3. Lay out your 2 matching fat quarters one on top of the other.
Then fold them in half lengthwise.
4. Print up the armhole template and cut along the solid lines. Lay it against the top and right (cut) edges.
Cut out the armholes through all four layers at once.
This is what you'll get:
5. Pin your two 2" x 18" pieces to the bottom of the dress pieces, right sides together.
6. Stitch with a ¼" seam. Finish your seam with a zig-zag stitch.
7. Press the seam toward the darker fabric.
8. Pin the dress pieces right sides together along the side seams.
Stitch from the bottom of the armhole to the hem. Finish your seam with a zig-zag stitch.
9. Now go ahead and make your bias tape using the 18" square and the "How To Make 4 Yards of Bias Tape From a Fat Quarter" tutorial.
10. Pin bias tape to the right side of each armhole.
11. Stitch in the crease, about 3/8" from the edge.
12. Turn the binding around to the other side and pin. Put all your pins on the right side of the dress. Be sure that your trim is wrapped tightly enough around so that your stitching will catch it on the back.
13. Top-stitch along the edge of the trim, sewing it down on the back at the same time.
14. Making the casing. Fold the top (neckline) down 2" toward the inside of the dress. Press.
15. Open up the fold that you just made, and press the edge down about ¼".
Then fold it back along the 2" line and press it again.
16. Stitch the casing down on the inside, close to the edge.
17. Making the ties. Cut two pieces of bias trim that are 35" long.
18. Open up the ends of the trim, and fold the edge to the inside. Refold and pin.
19. Stitch close to the edges.
20. Insert the ties through the casings using a safety pin.
21. Hemming. Press the bottom edge to the inside ¼", and then again ¼".
Stitch a narrow hem.
Ta-dah!!!!
Hopefully one day soon I can try this !!
ReplyDeleteThank you for sharing !